Timeline for How to prevent current and voltage fluctuations for loads connected in parallel to the same power supply?
Current License: CC BY-SA 4.0
6 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Apr 13, 2020 at 21:37 | comment | added | ElectroMechanical | I added the schematic. the wires of the motor around 1.5mm, that of LEDs are around 1mm. The amplifier used is this one: electronics.com.bd/… | |
| Apr 1, 2020 at 16:31 | history | edited | Edin Fifić | CC BY-SA 4.0 |
added 104 characters in body
|
| Apr 1, 2020 at 16:18 | comment | added | Edin Fifić | What is the thickness/gauge of your wires? Even short wires will have a voltage drop if they're thin. What is the power of your actuator (or the required current)? Can you take a picture of your setup, including a detailed picture of the amplifier (so that the components on its board are visible)? | |
| Apr 1, 2020 at 15:54 | comment | added | ElectroMechanical | My power supply is 12V/9A. Excuse me for not providing complete description. I tried disconnecting everything and only connecting the amplifier and speakers. (2x50W class D audio amplifier) .. and when music is played at high volume with base I can see the voltage fluctuations on the multimeter. | |
| Apr 1, 2020 at 15:05 | history | edited | Edin Fifić | CC BY-SA 4.0 |
added 377 characters in body
|
| Apr 1, 2020 at 14:59 | history | answered | Edin Fifić | CC BY-SA 4.0 |