Timeline for PCB practices: Grounding, and interaction b/w switching and control loops
Current License: CC BY-SA 3.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Nov 28, 2012 at 19:36 | comment | added | D.A.S. | In order to prevent EMI issues with any high impedance circuits nearby, I would put on output to suppress radiation. Input cable will also radiate so depends on system design overall. Use twisted pairs for both. | |
| Nov 28, 2012 at 19:24 | comment | added | Ahmed Shehada | Thakn you, Richman, for your useful comments. Regarding #2, should I reshape my ground planes? Also where would you suggest placing the ferrite CM chokes - at input and outpout at terminals, or other locations too? | |
| Nov 27, 2012 at 18:04 | history | answered | D.A.S. | CC BY-SA 3.0 |