Timeline for 12VDC Worm Gear motor suddenly stopped working now no current goes through it
Current License: CC BY-SA 4.0
6 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Sep 22, 2020 at 17:32 | vote | accept | TheCodeNovice | ||
| Sep 14, 2020 at 3:29 | comment | added | Spehro 'speff' Pefhany | The electronics is not going to be a problem on a 12V motor. | |
| Sep 14, 2020 at 3:21 | comment | added | TheCodeNovice | ok one more question could this be a back emf thing since the motor is an inductive load? Is the h bridge isolating the motor from the rest of the electronics | |
| Sep 13, 2020 at 18:27 | comment | added | Spehro 'speff' Pefhany | Probably not. The motor should survive full application of 12V or shorting when it's spinning. | |
| Sep 13, 2020 at 18:19 | comment | added | TheCodeNovice | @SpehroPethany would slowing down too fast be the same thing. My slider only has it go in one direction. So me moving to fast would be just very quick acceleration. | |
| Sep 13, 2020 at 15:37 | history | answered | Spehro 'speff' Pefhany | CC BY-SA 4.0 |