Hi.

I want to make capacitor value C1=C2=C3 and change it at once.

I know the .STEP PARAM command, but it needs at least two values.

I want to set all values equal, and change it simultaneously.

Like this. If I do set C=10u, All the capacitor's size is set to 10u. Is there any command or method to realize this?

I want to make capacitor value C1=C2=C3 and change it at once.

I know the .STEP PARAM command, but it needs at least two values.

I want to set all values equal, and change it simultaneously.

Like this. If I do set C=10u, All the capacitor's size is set to 10u. Is there any command or method to realize this?

Hi.

I want to make capacitor value C1=C2=C3 and change it at once.

I know the .STEP PARAM command, but it needs at least two values.

I want to set all values equal, and change it simultaneously.

Like this. If I do set C=10u, All the capacitor's size is set to 10u. Is there any command or method to realize this?

Thank you

Hi.

I want to make capacitor value C1=C2=C3 and change it at once.

I know the .STEP PARAM command, but it needs at least two values.

I want to set all values equal, and change it simultaneously.

Like this. If I do set C=10u, All the capacitor's size is set to 10u. Is there any command or method to realize this?