Timeline for Second order low pass filter: two 1st order filters not-immediately cascaded
Current License: CC BY-SA 4.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| May 21, 2022 at 22:59 | comment | added | Andy aka | @Domingo there should be no interaction between the filter system in the intermediate section and the two external filters. All three can be expected to perform to their own characteristics. | |
| May 21, 2022 at 20:15 | vote | accept | Domingo | ||
| May 21, 2022 at 17:20 | comment | added | Andy aka | @Domingo looking at your previous set of questions you asked I note that you may not be aware of protocol on this site so, please take the 2 minute tour and consider accepting answers to previous questions you have raised (where applicable). | |
| May 21, 2022 at 16:46 | comment | added | Domingo | The intermediary circuit is indeed a variable state filter (PEQ), so curves are added there. But all of them within the audible range, whereas the LPF in discussion would be well above it (at 48kHz). Should I be aware of any problems like interactions or so? Thanks a lot in advance. | |
| May 21, 2022 at 13:08 | history | answered | Andy aka | CC BY-SA 4.0 |