2 replaced http://electronics.stackexchange.com/ with https://electronics.stackexchange.com/
source | link

So I opened up a big bucket o' worms asking this questionthis question. Two of the answers mentioned that instead of using a 555, a PIC10F200 or PIC12F675 may do the trick.

Now, I've been spoiled with Arduino's programming interface...and have looked at this answerthis answer, and I want to expand on it a little bit. Mainly, I need someone who knows what they're talking about to confirm ro redirect my assumptions.

Assumption 1: There's some universal language for programming. It's likely assembly or some such.

Assumption 2: There's likely some software for PC that will allow me to write the program, and possibly even debug it.

Assumption 3: There's likely a USB or serial device that takes the completed code from my PC and flashes the chip. If I'm working with DIP-8, DIP-14 and DIP-28 chips at different times, is there some kind of universal IC flasher? or do I need a separate device for each chip?

What are some of the other questions that I need to be asking or pitfalls of which I need to be aware?

So I opened up a big bucket o' worms asking this question. Two of the answers mentioned that instead of using a 555, a PIC10F200 or PIC12F675 may do the trick.

Now, I've been spoiled with Arduino's programming interface...and have looked at this answer, and I want to expand on it a little bit. Mainly, I need someone who knows what they're talking about to confirm ro redirect my assumptions.

Assumption 1: There's some universal language for programming. It's likely assembly or some such.

Assumption 2: There's likely some software for PC that will allow me to write the program, and possibly even debug it.

Assumption 3: There's likely a USB or serial device that takes the completed code from my PC and flashes the chip. If I'm working with DIP-8, DIP-14 and DIP-28 chips at different times, is there some kind of universal IC flasher? or do I need a separate device for each chip?

What are some of the other questions that I need to be asking or pitfalls of which I need to be aware?

So I opened up a big bucket o' worms asking this question. Two of the answers mentioned that instead of using a 555, a PIC10F200 or PIC12F675 may do the trick.

Now, I've been spoiled with Arduino's programming interface...and have looked at this answer, and I want to expand on it a little bit. Mainly, I need someone who knows what they're talking about to confirm ro redirect my assumptions.

Assumption 1: There's some universal language for programming. It's likely assembly or some such.

Assumption 2: There's likely some software for PC that will allow me to write the program, and possibly even debug it.

Assumption 3: There's likely a USB or serial device that takes the completed code from my PC and flashes the chip. If I'm working with DIP-8, DIP-14 and DIP-28 chips at different times, is there some kind of universal IC flasher? or do I need a separate device for each chip?

What are some of the other questions that I need to be asking or pitfalls of which I need to be aware?

    Post Closed as "not a real question" by clabacchio
1
source | link

How do I get started with PIC programming?

So I opened up a big bucket o' worms asking this question. Two of the answers mentioned that instead of using a 555, a PIC10F200 or PIC12F675 may do the trick.

Now, I've been spoiled with Arduino's programming interface...and have looked at this answer, and I want to expand on it a little bit. Mainly, I need someone who knows what they're talking about to confirm ro redirect my assumptions.

Assumption 1: There's some universal language for programming. It's likely assembly or some such.

Assumption 2: There's likely some software for PC that will allow me to write the program, and possibly even debug it.

Assumption 3: There's likely a USB or serial device that takes the completed code from my PC and flashes the chip. If I'm working with DIP-8, DIP-14 and DIP-28 chips at different times, is there some kind of universal IC flasher? or do I need a separate device for each chip?

What are some of the other questions that I need to be asking or pitfalls of which I need to be aware?