Return to Answer

The voltage and currents on the load have to be constrained within all limits simultaneously: -

• Maximum current of 25 amps
• Maximum voltage of 750 volts
• Maximum product of voltage and current of 2400 watts (e.g. 10 amps and 240 volts)

I was thinking that it was possible to find an "SOA" of the electronic load into the datasheet, but I did not find it.

You can make an SOA curve from the above three bullet points: -

The voltage and currents on the load have to be constrained within all limits simultaneously: -

• Maximum current of 25 amps
• Maximum voltage of 750 volts
• Maximum product of voltage and current of 2400 watts (e.g. 10 amps and 240 volts)

I was thinking that it was possible to find an "SOA" of the electronic load into the datasheet, but I did not find it.

You can make an SOA curve from the above three bullet points: -

The voltage and currents on the load have to be constrained within all limits simultaneously: -

• Maximum current of 25 amps
• Maximum voltage of 750 volts
• Maximum product of voltage and current of 2400 watts (e.g. 10 amps and 240 volts)

I was thinking that it was possible to find an "SOA" of the electronic load into the datasheet, but I did not find it.

You can make an SOA curve from the above three bullet points.

The voltage and currents on the load have to be constrained within all limits simultaneously: -

• Maximum current of 25 amps
• Maximum voltage of 750 volts
• Maximum product of voltage and current of 2400 watts (e.g. 10 amps and 240 volts)

I was thinking that it was possible to find an "SOA" of the electronic load into the datasheet, but I did not find it.

You can make an SOA curve from the above three bullet points: -

The voltage and current you apply to the load has to be constrained to be within all limits simultaneously: -

• Maximum current of 25 amps
• Maximum voltage of 750 volts
• Maximum product of voltage and current of 2400 watts (e.g. 10 amps and 240 volts)

I was thinking that it was possible to find an "SOA" of the electronic load into the datasheet, but I did not find it.

You can make an SOA curve from the above three bullet points.

The voltage and currents on the load have to be constrained within all limits simultaneously: -

• Maximum current of 25 amps
• Maximum voltage of 750 volts
• Maximum product of voltage and current of 2400 watts (e.g. 10 amps and 240 volts)

I was thinking that it was possible to find an "SOA" of the electronic load into the datasheet, but I did not find it.

You can make an SOA curve from the above three bullet points.