Does this circuit have to be implemented with a DW01A and a FS8250A?

I want to make a simple circuit doing only the charging function of an 18650 battery.

The TP4056 does its own charging function, and it seems to be sufficient on its own?

I also read this blog saying that most commercial boards implementing these circuits are not well designed and do not use the DW01 circuit correctly (https://www.best-microcontroller-projects.com/tp4056.html)

I then asked myself the question of being satisfied, finally, with a TP4056 circuit alone in a context where I just want to make a simple load circuit.

The batteries will not be used at the same time.

  They will just be recharged and stored.

Does this circuit have to be implemented with a DW01A battery protection IC and a FS8205A dual MOSFET IC?

I want to make a simple circuit doing only the charging function of an 18650 battery.

The TP4056 has its own charging function, and it seems to be sufficient on its own.

I also read a blog saying that most commercial boards implementing these circuits are not well designed and do not use the DW01 circuit correctly.

I then asked myself the question of being satisfied with a TP4056 circuit alone in a context where I just want to make a simple load circuit.

The batteries will not be used at the same time. They will just be recharged and stored.

Does this circuit have to be implemented with a DW01A and a FS8250A?

I want to make a simple circuit doing only the charging function of an 18650 battery.

The TP4056 does its own charging function, and it seems to be sufficient on its own  ?

I also read this blog saying that most commercial boards implementing these circuits are not well designed and do not use the DW01 circuit correctly (https://www.best-microcontroller-projects.com/tp4056.html)

I then asked myself the question of being satisfied, finally, with a TP4056 circuit alone in a context where I just want to make a simple load circuit.

The batteries will not be used at the same time.

They will just be recharged and stored.

Does this circuit have to be implemented with a DW01A and a FS8250A?

I want to make a simple circuit doing only the charging function of an 18650 battery.

The TP4056 does its own charging function, and it seems to be sufficient on its own?

I also read this blog saying that most commercial boards implementing these circuits are not well designed and do not use the DW01 circuit correctly (https://www.best-microcontroller-projects.com/tp4056.html)

I then asked myself the question of being satisfied, finally, with a TP4056 circuit alone in a context where I just want to make a simple load circuit.

The batteries will not be used at the same time.

They will just be recharged and stored.