Timeline for Cannot stop Microcontroller's Hardware Timer from running
Current License: CC BY-SA 4.0
8 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Apr 30, 2023 at 18:40 | comment | added | G36 | Thank for the info. | |
| Apr 30, 2023 at 18:04 | comment | added | Wossname | @G36, it's an EasyDriver, link: "schmalzhaus.com/EasyDriver" Version v44. I've used these for a few years on and off. I've attached a small heatsink to mine, just in case. | |
| Apr 30, 2023 at 17:46 | comment | added | G36 | What type of motor driver you are using? | |
| Apr 30, 2023 at 17:15 | vote | accept | Wossname | ||
| Apr 30, 2023 at 17:12 | answer | added | G36 | timeline score: 2 | |
| Apr 30, 2023 at 17:00 | comment | added | Wossname | @G36, the devil is in the detail! Yes, you are right, now it works. Make this into an answer and I'll accept it. Thank you, this was driving me crazy. Sometimes you just need another pair of eyes! | |
| Apr 30, 2023 at 16:46 | comment | added | G36 |
Try to add a bracket () to the ~(1 << CS12) | (1 << CS11) | (1 << CS10); macro. Because now it seems that you are only clearing the CS12 bit. So the correct way to do it is this: ~((1 << CS12) | (1 << CS11) | (1 << CS10));
|
|
| Apr 30, 2023 at 15:26 | history | asked | Wossname | CC BY-SA 4.0 |