Skip to main content
Electrical Engineering

Return to Question

Notice removed Improve details by CommunityBot
Bounty Ended with Voitcus's answer chosen by CommunityBot
added 169 characters in body
Source Link
James Mitch
James Mitch
  • 111
  • 2
  • 9

I am now learning how to use PowerWorld Simulator. However, I faced some problems when I tried to enter the data given in the paper.

I want to simulate the following transmission loop: enter image description here

First things first, you see the generator ratings? (\$x_0\$, \$x_2\$ and \$ x^o\$)? How can I implement these data into the simulator? I went through all the options, but I couldn't find anything:

enter image description here enter image description here

As for the transmission line ratings, I see there are \$Z_0\$ and \$Z_1\$. What are they? And how can I enter these data into the program? There is only one place for one:

enter image description here

In any case, I need someone to simulate this program using the PowerWorld software and upload it.

(Note: all data should be in per-unit)

EDIT

Whenever I try to run this simulation, I get this message:

enter image description here

Any clue?

I am now learning how to use PowerWorld Simulator. However, I faced some problems when I tried to enter the data given in the paper.

I want to simulate the following transmission loop: enter image description here

First things first, you see the generator ratings? (\$x_0\$, \$x_2\$ and \$ x^o\$)? How can I implement these data into the simulator? I went through all the options, but I couldn't find anything:

enter image description here enter image description here

As for the transmission line ratings, I see there are \$Z_0\$ and \$Z_1\$. What are they? And how can I enter these data into the program? There is only one place for one:

enter image description here

In any case, I need someone to simulate this program using the PowerWorld software and upload it.

(Note: all data should be in per-unit)

I am now learning how to use PowerWorld Simulator. However, I faced some problems when I tried to enter the data given in the paper.

I want to simulate the following transmission loop: enter image description here

First things first, you see the generator ratings? (\$x_0\$, \$x_2\$ and \$ x^o\$)? How can I implement these data into the simulator? I went through all the options, but I couldn't find anything:

enter image description here enter image description here

As for the transmission line ratings, I see there are \$Z_0\$ and \$Z_1\$. What are they? And how can I enter these data into the program? There is only one place for one:

enter image description here

In any case, I need someone to simulate this program using the PowerWorld software and upload it.

(Note: all data should be in per-unit)

EDIT

Whenever I try to run this simulation, I get this message:

enter image description here

Any clue?

Tweeted twitter.com/#!/StackElectronix/status/332631222301900802
Notice added Improve details by James Mitch
Bounty Started worth 100 reputation by James Mitch
added 150 characters in body
Source Link
James Mitch
James Mitch
  • 111
  • 2
  • 9

I am now learning how to use PowerWorld Simulator. However, I faced some problems when I tried to enter the data given in the paper.

I want to simulate the following transmission loop: enter image description here

First things first, you see the generator ratings? (\$x_0\$, \$x_2\$ and \$ x^o\$)? How can I implement these data into the simulator? I went through all the options, but I couldn't find anything:

enter image description here enter image description here

As for the transmission line ratings, I see there are \$Z_0\$ and \$Z_1\$. What are they? And how can I enter these data into the program? There is only one place for one:

enter image description here

In any case, I need someone to simulate this program using the PowerWorld software and upload it.

(Note: all data should be in per-unit)

I am now learning how to use PowerWorld Simulator. However, I faced some problems when I tried to enter the data given in the paper.

I want to simulate the following transmission loop: enter image description here

First things first, you see the generator ratings? (\$x_0\$, \$x_2\$ and \$ x^o\$)? How can I implement these data into the simulator? I went through all the options, but I couldn't find anything:

enter image description here enter image description here

As for the transmission line ratings, I see there are \$Z_0\$ and \$Z_1\$. What are they? And how can I enter these data into the program? There is only one place for one:

enter image description here

I am now learning how to use PowerWorld Simulator. However, I faced some problems when I tried to enter the data given in the paper.

I want to simulate the following transmission loop: enter image description here

First things first, you see the generator ratings? (\$x_0\$, \$x_2\$ and \$ x^o\$)? How can I implement these data into the simulator? I went through all the options, but I couldn't find anything:

enter image description here enter image description here

As for the transmission line ratings, I see there are \$Z_0\$ and \$Z_1\$. What are they? And how can I enter these data into the program? There is only one place for one:

enter image description here

In any case, I need someone to simulate this program using the PowerWorld software and upload it.

(Note: all data should be in per-unit)

Source Link
James Mitch
James Mitch
  • 111
  • 2
  • 9

Simulation for a transmission loop using PowerWorld

I am now learning how to use PowerWorld Simulator. However, I faced some problems when I tried to enter the data given in the paper.

I want to simulate the following transmission loop: enter image description here

First things first, you see the generator ratings? (\$x_0\$, \$x_2\$ and \$ x^o\$)? How can I implement these data into the simulator? I went through all the options, but I couldn't find anything:

enter image description here enter image description here

As for the transmission line ratings, I see there are \$Z_0\$ and \$Z_1\$. What are they? And how can I enter these data into the program? There is only one place for one:

enter image description here