Skip to main content
Electrical Engineering

Return to Question

Became Hot Network Question
Consistent spelling of "converter"
Source Link
JYelton
JYelton
  • 34.9k
  • 34
  • 147
  • 272

How can I replace a potentiometer with a fixed resistor on a buck convertorconverter?

I want to use a buck converter which steps down 12 V DC to 5V5 V constant DV output to power my custom PCB.

I came across a buck convertorconverter in market which can do it but there is potentiometer on it which can be adjusted to vary the output voltage.

Below you can see the schematic for the buck convertorconverter and where I plan to remove the potentiometer and put fixed resistors to get a 5V5 V constant output.

enter image description here

enter image description here

Can someone help me in how to put fixed resistors in place of potentiometer and how to calculate the value of resistor?

MP2307 Data sheet

How can I replace a potentiometer with a fixed resistor on a buck convertor?

I want to use a buck converter which steps down 12 V DC to 5V constant DV output to power my custom PCB.

I came across a buck convertor in market which can do it but there is potentiometer on it which can be adjusted to vary the output voltage.

Below you can see the schematic for the buck convertor and where I plan to remove the potentiometer and put fixed resistors to get a 5V constant output.

enter image description here

enter image description here

Can someone help me in how to put fixed resistors in place of potentiometer and how to calculate the value of resistor?

MP2307 Data sheet

How can I replace a potentiometer with a fixed resistor on a buck converter?

I want to use a buck converter which steps down 12 V DC to 5 V constant DV output to power my custom PCB.

I came across a buck converter in market which can do it but there is potentiometer on it which can be adjusted to vary the output voltage.

Below you can see the schematic for the buck converter and where I plan to remove the potentiometer and put fixed resistors to get a 5 V constant output.

enter image description here

enter image description here

Can someone help me in how to put fixed resistors in place of potentiometer and how to calculate the value of resistor?

MP2307 Data sheet

deleted 14 characters in body; edited title
Source Link
JRE
JRE
  • 73.6k
  • 10
  • 112
  • 195

Replacing Potentiometer by How can I replace a potentiometer with a fixed Resistorresistor on a buck convertor?

I want to use a buck converter on my custom PCB for powering the board which steps down 12 V DC to 5V constant DV output to power my custom PCB. I

I came across a Buck Convertorbuck convertor in market which can do the stuffit but there is potentiometer on it which can be adjusted to vary the output voltage. Below

Below you can see the schematic for the buck convertor and herewhere I plan to remove the potentiometer and put fixed resistors to get a 5V constant output.   

enter image description here   

enter image description here

Can someone help me in how to put fixed resistors in place of Potentiometerpotentiometer and how to calculate the value of resistor  ?

MP2307 Data sheet

Replacing Potentiometer by fixed Resistor on a buck convertor

I want to use a buck converter on my custom PCB for powering the board which steps down 12 V DC to 5V constant DV output. I came across a Buck Convertor in market which can do the stuff but there is potentiometer on it which can be adjusted to vary the output voltage. Below you can see the schematic for the buck convertor and here I plan to remove the potentiometer and put fixed resistors to get 5V constant output.  enter image description here  enter image description here

Can someone help me in how to put fixed resistors in place of Potentiometer and how to calculate the value of resistor  ?

MP2307 Data sheet

How can I replace a potentiometer with a fixed resistor on a buck convertor?

I want to use a buck converter which steps down 12 V DC to 5V constant DV output to power my custom PCB.

I came across a buck convertor in market which can do it but there is potentiometer on it which can be adjusted to vary the output voltage.

Below you can see the schematic for the buck convertor and where I plan to remove the potentiometer and put fixed resistors to get a 5V constant output. 

enter image description here 

enter image description here

Can someone help me in how to put fixed resistors in place of potentiometer and how to calculate the value of resistor?

MP2307 Data sheet

added 89 characters in body
Source Link
StainlessSteelRat
StainlessSteelRat
  • 8.2k
  • 2
  • 19
  • 34

I want to use a buck converter on my custom PCB for powering the board which steps down 12 V DC to 5V constant DV output. I came across a Buck Convertor in market which can do the stuff but there is potentiometer on it which can be adjusted to vary the output voltage. Below you can see the schematic for the buck convertor and here I plan to remove the potentiometer and put fixed resistors to get 5V constant output. enter image description here enter image description here

Can someone help me in how to put fixed resistors in place of Potentiometer and how to calculate the value of resistor ?

MP2307 Data sheet

I want to use a buck converter on my custom PCB for powering the board which steps down 12 V DC to 5V constant DV output. I came across a Buck Convertor in market which can do the stuff but there is potentiometer on it which can be adjusted to vary the output voltage. Below you can see the schematic for the buck convertor and here I plan to remove the potentiometer and put fixed resistors to get 5V constant output. enter image description here enter image description here

Can someone help me in how to put fixed resistors in place of Potentiometer and how to calculate the value of resistor ?

I want to use a buck converter on my custom PCB for powering the board which steps down 12 V DC to 5V constant DV output. I came across a Buck Convertor in market which can do the stuff but there is potentiometer on it which can be adjusted to vary the output voltage. Below you can see the schematic for the buck convertor and here I plan to remove the potentiometer and put fixed resistors to get 5V constant output. enter image description here enter image description here

Can someone help me in how to put fixed resistors in place of Potentiometer and how to calculate the value of resistor ?

MP2307 Data sheet

deleted 23 characters in body
Source Link
Ashish1313
Ashish1313
  • 99
  • 4
Source Link
Ashish1313
Ashish1313
  • 99
  • 4