I'm working on a switched mode power supply that outputs 9V9 V in a simulation using a NE555 timer connected to the gate of my MOSFET and switching at 96 KhzkHz frequency. Other components works just fine except the MOSFET which keeps on blowing because of gate-drain voltage exceeding 20V20 V. I tried putting resistors, diodes but still nothing. What should I do?What What am I doing wrong?
I'm working on a switched mode power supply that outputs 9V in a simulation using a NE555 timer connected to the gate of my MOSFET and switching at 96 Khz frequency. Other components works just fine except the MOSFET which keeps on blowing because of gate-drain voltage exceeding 20V. I tried putting resistors, diodes but still nothing. What should I do?What am I doing wrong?
I'm working on a switched mode power supply that outputs 9 V in a simulation using a NE555 timer connected to the gate of my MOSFET and switching at 96 kHz frequency. Other components works just fine except the MOSFET which keeps on blowing because of gate-drain voltage exceeding 20 V. I tried putting resistors, diodes but still nothing. What should I do? What am I doing wrong?
I'm working on a switched mode power supply that outputs 9V in a simulation using a NE555 timer connected to the gate of my MOSFET and switching at 96 Khz frequency. Other components works just fine except the MOSFET which keeps on blowing because of gate-drain voltage exceeding 20V. I tried putting resistors, diodes but still nothing. What should I do?What am I doing wrong?
