Timeline for TP4056 with protection: schematic review
Current License: CC BY-SA 4.0
17 events
when toggle format | what | by | license | comment | |
---|---|---|---|---|---|
Oct 7 at 21:01 | history | bumped | CommunityBot | This question has answers that may be good or bad; the system has marked it active so that they can be reviewed. | |
May 6 at 7:16 | comment | added | Gos | XC6210B332MR should be Ok, I think. The drop out voltage (the difference between Vin and Vout), is smaller. So it should work with the battery voltages. | |
May 6 at 7:03 | comment | added | Gos | You can check in this post the explanation and how to set the mosfet: best-microcontroller-projects.com/tp4056-page2.html Also check the schematic of the module, it's what you are doing, more or less. | |
May 5 at 22:42 | history | edited | ewaca | CC BY-SA 4.0 |
edited body
|
May 5 at 20:36 | history | edited | ewaca | CC BY-SA 4.0 |
edited body
|
May 5 at 20:18 | history | edited | ewaca | CC BY-SA 4.0 |
added 18 characters in body
|
May 5 at 20:17 | history | edited | ewaca | CC BY-SA 4.0 |
added 2 characters in body
|
May 5 at 20:17 | history | edited | ewaca | CC BY-SA 4.0 |
added 369 characters in body
|
May 5 at 20:15 | answer | added | Justme | timeline score: 1 | |
May 5 at 19:19 | comment | added | Gos | But, the AMS1117 will not work with one 3.7V battery. The drop out voltage of the LDO is about 1.2V, so it would need at least 4.5V to work. And the diode is adding a voltage drop. You should use another LDO and replace the diode by a P-channel mosfet. | |
May 5 at 19:14 | comment | added | Gos | Without the blue connection the battery will not power the MCU. And the diode is there to prevent that the battery is being charged and powering the load at the same time. When there are 5V in the USB rail, the diode is reverse biased. | |
May 5 at 18:51 | history | edited | ewaca | CC BY-SA 4.0 |
added 153 characters in body
|
May 5 at 18:36 | comment | added | Antonio51 | Here is what is commonly used forum.arduino.cc/t/tp4056-dw01a-li-ion-battery-charger-circuit/… | |
May 5 at 18:22 | history | edited | ocrdu | CC BY-SA 4.0 |
added 23 characters in body; edited title
|
May 5 at 17:41 | history | edited | ewaca | CC BY-SA 4.0 |
added 2 characters in body
|
S May 5 at 17:39 | review | First questions | |||
May 5 at 17:49 | |||||
S May 5 at 17:39 | history | asked | ewaca | CC BY-SA 4.0 |