Skip to main content
16 events
when toggle format what by license comment
Sep 27 at 8:27 answer added Naveen Kurumaddali timeline score: 1
Sep 26 at 23:44 answer added Davide Andrea timeline score: 1
Sep 26 at 17:27 review Suggested edits
Sep 26 at 20:19
S Sep 26 at 16:21 history suggested MarianD CC BY-SA 4.0
Links assigned directly to appropriate texts, formatting, some fixes.
Sep 26 at 16:03 comment added arjun kumar @ sai,i am expecting a MOSFET circuit or low cost IC which can perform the switching of 5v (dc power supply) and 5v from Battery
Sep 26 at 16:01 comment added arjun kumar @sai, the min(is 5v) and max(is 5.5v) voltages that the Nodemcu ESP-12E Vin pin can take without overheating AMS1117 (LDO) present on Nodemcu v1.0(overheating reduces its lifespan) and overheating will also spoils the WiFi chip functionality present on Nodemcu v1.0. the Vin- Vout voltage of AMS1117 (with 3.3v regulator output) at 800mA should be 1.3V
Sep 26 at 15:58 comment added sai @arjunkumar, can your boost converter be programmed to provide 6V instead of 5V?
Sep 26 at 15:56 comment added arjun kumar @Hearth, i will add the flyback diode, but the problem here is the Mechanical Relays slow switching speed
Sep 26 at 15:37 review Suggested edits
S Sep 26 at 16:21
Sep 26 at 15:30 comment added Hearth Your relay has no flyback network, which is potentially an issue but not the main issue here.
Sep 26 at 15:20 comment added sai What are the min and max voltages that the Nodemcu ESP-12E Vin pin can take? I could not understand why you think the diode solution is problematic. Could you elaborate?
S Sep 26 at 15:18 history suggested MarianD CC BY-SA 4.0
Some fixes.
Sep 26 at 14:50 review Suggested edits
S Sep 26 at 15:18
Sep 26 at 14:35 history edited arjun kumar CC BY-SA 4.0
added 98 characters in body
Sep 26 at 14:29 history edited arjun kumar CC BY-SA 4.0
added 98 characters in body
Sep 26 at 14:24 history asked arjun kumar CC BY-SA 4.0