Skip to main content
Electrical Engineering

Return to Question

Became Hot Network Question
added 12 characters in body
Source Link
Transistor
Transistor
  • 180.4k
  • 14
  • 194
  • 417

This is intended to be a voltage multiplier.

Can anyone check if my connections are correct or accurate to my schematic?

enter image description here

https://i.sstatic.net/vB6k6bo7.pngenter image description here

https://i.sstatic.net/bZvSGrnU.png

This is intended to be a voltage multiplier.

Can anyone check if my connections are correct or accurate to my schematic?

enter image description here

https://i.sstatic.net/vB6k6bo7.png

https://i.sstatic.net/bZvSGrnU.png

This is intended to be a voltage multiplier.

Can anyone check if my connections are correct or accurate to my schematic?

enter image description here

enter image description here

deleted 21 characters in body; edited title
Source Link
toolic
toolic
  • 9.8k
  • 9
  • 27
  • 35

Help, I don't know if my connections are correct. (Schematic to breadboard)

This is intended to be a voltage multiplier.

Just as the title said, canCan anyone check if my connections are correct or accurate to my schematic.?

enter image description here   

https://i.sstatic.net/vB6k6bo7.png   

https://i.sstatic.net/bZvSGrnU.png

Help, I don't know if my connections are correct. (Schematic to breadboard)

This is intended to be a voltage multiplier.

Just as the title said, can anyone check if my connections are correct or accurate to my schematic.

enter image description here  https://i.sstatic.net/vB6k6bo7.png  https://i.sstatic.net/bZvSGrnU.png

I don't know if my connections are correct. (Schematic to breadboard)

This is intended to be a voltage multiplier.

Can anyone check if my connections are correct or accurate to my schematic?

enter image description here 

https://i.sstatic.net/vB6k6bo7.png 

https://i.sstatic.net/bZvSGrnU.png

added 29 characters in body
Source Link
Russell McMahon ♦
Russell McMahon ♦
  • 152.1k
  • 18
  • 218
  • 402

This is intended to be a voltage multiplier.

Just as the title said, can anyone check if my connections are correct or accurate to my schematic. Also, it's my first time using the site so I apologize if I don't know how to add an image properly. Thanks

enter image description here https://i.sstatic.net/vB6k6bo7.png https://i.sstatic.net/bZvSGrnU.png

Just as the title said, can anyone check if my connections are correct or accurate to my schematic. Also, it's my first time using the site so I apologize if I don't know how to add an image properly. Thanks

https://i.sstatic.net/vB6k6bo7.png https://i.sstatic.net/bZvSGrnU.png

This is intended to be a voltage multiplier.

Just as the title said, can anyone check if my connections are correct or accurate to my schematic.

enter image description here https://i.sstatic.net/vB6k6bo7.png https://i.sstatic.net/bZvSGrnU.png

added 109 characters in body
Source Link
Snow Fairy24
Snow Fairy24
  • 39
  • 2
added 27 characters in body
Source Link
Snow Fairy24
Snow Fairy24
  • 39
  • 2
Source Link
Snow Fairy24
Snow Fairy24
  • 39
  • 2