0
\$\begingroup\$

how to connect mic left and mic right to single TRRS mic connection. The first figure shows mic left and mic right connected to microphone output jack. I want to replace this output jack with the TRRS jack as shown in figure 2. the second figure shows Ring2 as the mic connection.

mic left and mic right enter image description here

\$\endgroup\$
1
  • \$\begingroup\$ so, you want to combine the left and right mic signals into a single mic signal (like might be used on a smartphone or tablet)? \$\endgroup\$ Aug 26, 2017 at 19:57

1 Answer 1

1
\$\begingroup\$

You can leave RING2 unconnected or you can connect it to sleeve. The second option means it will work on both three or four-wire cables.

3-pin            4-pin
Tip ------------ Tip
Ring ----------- Ring1
              +- Ring2
Sleeve -------+- Sleeve

By the way, the figure does not show RING2 as the mic connection.

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.