Found on an early 90's JVC stereo: 2 rows, 11 pins, the two rows are horizontally displaced against each other, kind of like a SUB-D connector. However, the pins are neither round, nor quadratic but bars.
The pitch is 3mm (horizontally) by 2mm (between rows)
Your help is greatly appreciated.
I have seen similar on OEM GPS modules (inside car radios), medical lab instruments (blood drop analyser) and bank note acceptors (in vending machines).
They were all IDC type onto ribbon cable and most had a projecting plastic key pin on one end. I seem to remember either the plugs or sockets being red in colour often.
The ones I am thinking or are called Micro-MaTch and may be a variant though do not exhibit the zig-zag insulator characteristic.
