We have developed product for Malesia country, where we need local SIRIM certificate.
RF module we used in our product is 2.4Ghz wifi mesh, with max 30dbm (1 watt) output power capacity.
To get SIRIM we need to submit CE report of product to SIRIM. We have done EMC testing as per CE, but have some doubt in radio related testing as per EN 300 328.
Q1) at what power level we need to set in our radio to do this EN 300 328 testing. Do we need to set 100mW,500mw or 1W?
Q2) Malesia max limit is 500mW. Do we need to set 500mW or is anything less than 500mw ok?
Q3) If we set 100mW and completed CE test and later in final product we can not go more than 100mW since Malesia have till 500mW.
Q4) EN 300 328 "maximum power test " say 20dBm (100mW is max,) then what does it mean we can not test a product more than 100mw if they has capacity more than 100mW.
Q5) If I test at 500mW then in EN 300 328 "maximum transmit test ' is it going to fail?
Please advise. Below is the link of sample report of EN 300 328 taken from internet. http://processors.wiki.ti.com/images/8/8c/ER3N2752_R01_EN300328_Texas_WG7835-B0.pdf