0
\$\begingroup\$

I would like to know if you have a way to call without needing a line of communication at CADENCE?

See the example in the PROTEUS software image, at the time I made the connections without needing the lines, this makes the visualization less polluted and easier to locate the components in the schematic.

I will be grateful if someone provides a link or PDF of a complete CADENCE tutorial.

enter image description here

\$\endgroup\$
1
  • \$\begingroup\$ It's called a net alias or net name. \$\endgroup\$
    – DKNguyen
    Commented Apr 9, 2020 at 19:15

1 Answer 1

1
\$\begingroup\$

With most CAD systems you can attach a "net name" to a wire, and all wires with the same net name will be connected together, without actually drawing a wire between them.

Note that placing a net name should be a specific function of the program - just placing random text beside a wire will not name it.

\$\endgroup\$
2
  • \$\begingroup\$ I don't know if this was a communication failure because of the language transfer, but I mean: I want to make a wireless call using a PIN. I don't know which command or icon is connected from one end to the other without using wires. I took an example from Proteus because I know it is possible to do this. Repeat I don't want to use wires I want to use this connection model. I just can't find it in CADENCE. NOTE: it has the PIN, but in this case I realized that used to make the call in the layout, it does not occur in the schematic. \$\endgroup\$
    – LUFER
    Commented Apr 10, 2020 at 20:09
  • \$\begingroup\$ In the CAD systems I've used, you can't put a net name directly on a component pin - you need to draw a short bit of wire, and put the net name on that. Possible language/translation problem: when you say "wireless call using PIN" I think of using a cell phone or radio to pass information, not indicating connections on a schematic. \$\endgroup\$ Commented Apr 10, 2020 at 20:56

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.