I'm facing a vague issue with MPU9250. When I tested with Multimeter, it shows that VCC and GND are short but the device is working fine, Output perfect accelerometer and gyroscope data.
My circuit is like the image below.
\$\begingroup\$
\$\endgroup\$
2
-
\$\begingroup\$ How did your multimeter show that Vcc and GND were shorted? What mode was the meter in - resistance, continuity, or ?? \$\endgroup\$– Peter BennettCommented Aug 18, 2021 at 5:25
-
1\$\begingroup\$ electronics.stackexchange.com/a/276668/35022 \$\endgroup\$– MarkUCommented Aug 18, 2021 at 5:32
Add a comment
|