Is it possible to wire a SuzyQable without soldering and without a breadboard?
Chromium documentation on how to wire the cable: https://chromium.googlesource.com/chromiumos/third_party/hdctools/+/HEAD/docs/ccd.md#SuzyQ-SuzyQable
Example with breadboard: Making own Chromebook debug cable (SuzyQable)
Example without breadboard, with solder. In this video it doesn't show how the USB A 5V to the USBC breakout board is wired, or how the ground is wired on the USBC breakout board: https://www.youtube.com/watch?v=WGsyXlgSxFk
So, with this USB C board that appears to have 2 channels for each of the pins https://www.amazon.com/dp/B09FGT81TX/. Along with this USB A to 4-pin cable https://www.amazon.com/dp/B0925H39R3/. Then using female-to-female jumper wires. Assuming this might be an option to get everything wired with this board, except for how to get 5V to both of the resistors.
C A
- - -
A8 FF D+
B8 FF D-
A4 FF 5V
A9 FF A4
B4 FF A9
B9 FF A9
A5 FF 22k FF B9
B5 FF 56k FF ?
A1 FF GND
A12 FF A1
B1 FF A12
B12 FF B1
Any ideas if it's possible to accomplish a solderless SuzyQable without a breadboard?
