Hide particular airwires/nets in eagle

Is it possible to hide particular airwires in eagle, without hiding all of them?

So if there's a net I am not currently interested in, but it has a lot of connections, confusing where other airwires go, I can hide it. I am wanting to do this for GND and +V but, don't want to run ratsnest resulting in a pour.

Any ideas?

• I avoid this problem by doing the power and ground connections first. They can always be tweaked later if the signal routing requires it, but they really should be your first priority. Sep 8, 2014 at 13:35

ratsnest ! GND