Anyone familiar with connectors that have large enough spacing to support the creepage/clearance requirements for 400-600V, but that don't need to carry much current (only a few milliamps at most)?
We're presently using Molex Sabre connectors which are rated at 600V 18A but it's silly to need such a large contact. The spacing is what I need, not the contact size.
edit: I am looking for multipin systems with between 4 and 8 contacts.
Any suggestions? (besides buying smaller connectors and leaving out every other pin -- that's not very manufacturable unless the manufacturer offers this as a standard option)
I am offering an "honor system bounty" of 100 points: if I get an answer that is an improvement over the Sabre connector, I'll accept the best one and add an after-the-fact 100 point bounty.