We are running FreeRTOS with CMSIS. Is it possible, using CMSIS on STM32F3 Discovery board, to have periodic tasks running with periods less than 1 millisecond resolution? We want to run tasks at 400 Hz, meaning the period should be 2.5 milliseconds. All functions pertaining to delays in CMSIS that i've found have millisecond resolution. Should we reconsider using CMSIS for our purposes?
EDIT 2: A straight forward question now, hehe. Could someone show me an example of how to setup a task to run periodically with a rate of 400 Hz with FreeRTOS, possibly using CMSIS but not limited to it, on STM32F3 Discovery board?
EDIT: I will try to explain in more detail. The task is a PID controller that should run as fast as possible, but no faster than 432 Hz. So 400 Hz seemed like a round number. This means that 2 ms is a too short period. And the difference in task frequency between 2 ms and, say, 4 ms is quite dramatically. I don't quite know how much jitter we can accept, though. But it should probably not be in the millisecond range.
It seems more and more like we have to make use of the native FreeRTOS calls for the timing of tasks.
We would happily trade CPU utilization for greater timing accuracy since we won't probably make use of a great deal of the cycles in non-OS activity.