I want to add the component SIM968 GSM/GNSS Module to my KiCAD project. But I am not able to download any library from anywhere like I found one for the SIM908 while I was using Eagle.
Any advices as to how I could find a solution to my problem?
\$\begingroup\$
\$\endgroup\$
2
-
2\$\begingroup\$ You should seriously consider creating the library. You'll need that knowledge sooner or later... I personally quite enjoy the process :) \$\endgroup\$ – Dzarda Dec 17 '14 at 10:44
-
\$\begingroup\$ this is the response I was scared to recieve. But since I got it already, OK I will take your word for it. That means I will have to lean how to create a foot print as well as a schematic component. Am I right? could you please recommend a reliable source for me to start learning how to do the same? \$\endgroup\$ – Denis Dec 17 '14 at 11:15
Add a comment
|
\$\begingroup\$
\$\endgroup\$
I recommend creating your own. I learnt how to do it by following this small tutorial project by Contextual Electronics.
answered Mar 22 '16 at 12:02
