0
\$\begingroup\$

I'm building a lamp and want to integrate an analog voltmeter (0-300 volts AC) in to the circuit. It has an LED backlit dial that requires a separate, 6.3v power supply. Any suggestions on how an idiot (that's me) can pull this off inside a very small wooden box that I am using for the base of the lamp?

\$\endgroup\$
3
  • \$\begingroup\$ 4 x aa batteries and a switch comes to mind. \$\endgroup\$ Apr 14, 2015 at 17:31
  • \$\begingroup\$ Bridge rectifier, zener diode, resistor? \$\endgroup\$ Apr 14, 2015 at 17:46
  • \$\begingroup\$ Not exactly what I was going for. The lamp will have 4, 15 watt light bulbs that plugs into a regular 120vac outlet. I was going to splice the voltmeter into the power cord. I thought maybe a small transformer would do the job. \$\endgroup\$
    – user72285
    Apr 14, 2015 at 18:06

1 Answer 1

2
\$\begingroup\$

You could use a small 4.5v transformer with a bridge rectifier and filter, but that would be overkill. And a transformerless design most probably too dangerous, so yes, go with the batteries.

\$\endgroup\$
1
  • \$\begingroup\$ OK, well the case that the meter will be housed in does not open so the battery option won't work because there will be no way to change the batteries. Guess I will go with a meter that has an integrated incandescent light. It won't look as good (can't find a round one) but if I can't supply it from the same source as the lamp, then it is pointless. Thanks for the advice. \$\endgroup\$
    – user72285
    Apr 15, 2015 at 5:00

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.