What am I using? 3 stages of amplification. An input voltage of 10mV peak or 20mV pkpk into the first stage.
1st stage: NJFET Common Source. Using a voltage gain of 3.
2nd stage: NPN BJT Emitter Resister. Using a voltage gain of 30.
3rd stage: NPN BJT Emitter Resister. Using a voltage gain of 30.
What is my problem? I am getting bad clipping on my final output in multisim simulations. The first two stages simulated great. I got a voltage gain of around 68 from the first two stages with no clipping. I know these two stages work correctly. The last stage is where I'm getting my clipping.
Below I will include images of my circuit, my output/input values, as well as my calculations.
Why I need your help I need to get rid of this voltage clipping. Any suggestions would be great. Thanks!