In Altium, does a multilayer Pad with the same net as a plane (internal ground plane in this case) automatically connect to that plane, or is a separate via required?
\$\begingroup\$
\$\endgroup\$
1
asked Apr 30, 2015 at 6:39
-
1\$\begingroup\$ I'm pretty sure the connection is automatically added. \$\endgroup\$– AJBothaCommented Apr 30, 2015 at 6:48
Add a comment
|
1 Answer
\$\begingroup\$
\$\endgroup\$
Yes, I can confirm that it does connect automatically, you don't need a separate via.
