4
\$\begingroup\$

What does this schematics symbol mean?

Unidentified symbol

Taken from here.
I got the PCB and it's not a button.

\$\endgroup\$

3 Answers 3

Reset to default
11
\$\begingroup\$

It looks like a solder bridge. Sometimes there can be a jumper that you need to put, sometimes it is just two very close pads that you join with a blob of solder.

Solder bridge jumper

\$\endgroup\$
1
  • 1
    \$\begingroup\$ Looking at this picture of the I2C-PROX board that the schematic in the question points to you are definitely right. \$\endgroup\$
    – Mattias Johansson
    Commented May 28, 2015 at 8:11
4
\$\begingroup\$

Either a jumper or a cuttable trace on the pcb (as opposed to a unpopulated trace). As an i2c module, it's so you can disconnect the on board i2c pullups if you have them somewhere else or if the values don't suit your need. A picture of the board would confirm, but I'm 110% on this.

\$\endgroup\$
1
\$\begingroup\$

It looks like jumper; The LED ON/OFF we configure through the this jumper.

\$\endgroup\$
2
  • \$\begingroup\$ Why the down vote? \$\endgroup\$
    – Daniel Grillo
    Commented May 28, 2015 at 11:39
  • \$\begingroup\$ Probably grammar. He is right that the led is also using a solder jumper here, I only saw the i2c pullups. \$\endgroup\$
    – Passerby
    Commented May 28, 2015 at 14:07

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.