12
\$\begingroup\$

I'm thinking to know what is the usage of these parts of this circuit.

figure1

Source

It's the schematic of UT70C Digital multimeter.

\$\endgroup\$
12
\$\begingroup\$

The way they are connected they'll act as a bipolar 8~9V "zener". They would be for over-voltage protection, is my guess.

Edit: This is because of the reverse breakdown of the emitter-base junction, more at this Wiki reference (thanks to @Leo). The ~7V breakdown of the E-B junction is in series with the forward voltage of the other transistors E-B junction, adding up to around 8V, depending on the current.

The transistors they are using are very inexpensive in China, and probably used elsewhere in their products, so they may be more attractive than conventional MELF zener diodes connected back-to-back.

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.