LTSpice has the element called
Lossy transmission line (symbol name
I tried to simalate a pretty simple schematic:
- R2,R3 and R4 resistors are for solve floating node problem.
Simulation of this scheme is extremely slow (about 30us/sec). If I remove the ltline symbols and replace them with a wire or a resistor the simulation speed is a link of an eye!
However I need an element representing an electrical wire. Is there any solution?
After making the simulation times shorter (1ms) I received some kind of a result:
And I make a note that if the O1 line becomes shorter the simulation time rises.