Can you please help me to identify this connector?

It's being used to connect a 6V power supply (4 x D batteries) to a PCB

unknown connector 1

unknown connector 2


The pitch appears to be just over 2.5mm. Please see image below for evidence of this. I've also attached a further image of the top elevation.

connector pitch

top elevation

  • \$\begingroup\$ Not sure, but looks suspiciously like a 2-pin JST connector perhaps? \$\endgroup\$ Sep 21, 2015 at 8:28
  • \$\begingroup\$ I ruled that out because the guides at the top and bottom are different... \$\endgroup\$ Sep 21, 2015 at 8:32
  • 1
    \$\begingroup\$ Can you give some measurements? Is it a common 2.54mm from pin to pin or something else? \$\endgroup\$
    – Arsenal
    Sep 21, 2015 at 9:17
  • \$\begingroup\$ @Arsenal I've just updated the question. I believe it is 2.54mm pitch \$\endgroup\$ Sep 22, 2015 at 8:30

1 Answer 1


"JST" is actually the name of a company that manufactures many types of connectors, and is not actually a connector type. What you have there is similar to a J.S.T. XH series connector.

  • \$\begingroup\$ That looks to be it! In particular a XHP-2. Thank you very much! \$\endgroup\$ Sep 22, 2015 at 10:10

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.