Referring [This Link] (I2C: Unable to Read Multiple Byte using Bit-Banging method).
I created an I2C BitBanging library for Pic16f877A. But I am unable to Read/Write the EEPROM.
My Pin Configuration are :
SCK : RB0
SDATA_OUT : RB1
SDATA_IN : RB2
Rest code remains the same.
Possibly, The issue could be of the delay function as I am using OSC = 11.0592 MHZ with Pic16f877A. but tried increasing the delay by 2 times. Issue remains the same.
Also,
#pragma config FOSC = HS
Can any one help me with Possible issues and way to rectify the issue.
Note: Code remains the same as the link says. Only Pin and its required registers are changed for Pic16f877A.