0
\$\begingroup\$

I have .bin and .hex files that I want to load into my PIC18F2480 device. I also have a .doc file explaining how to configure PIC18F2480 before programming. I've been told that it is possible to use PICkit 2(3) programmer and these 3 files to program a brand new PIC18F2480 device.

Here you can find the files.

I could not make it with PICkit 3 programmer and MPLAB X IDE/IPE because I don't know how to combine all the files (.hex + .bin + some settings).

Would you, professional PIC users, take a quick and experienced look on the files and let me know if this is really possible?

| improve this question | |
\$\endgroup\$
5
\$\begingroup\$

Easiest way is to use the IPE.

File->Import->Hex

enter image description here

| improve this answer | |
\$\endgroup\$
  • \$\begingroup\$ Thanks for the suggestion. I know that it is possible to import .hex file. But what about .bin file and the settings I have!? Should I load a .bin file somewhere? \$\endgroup\$ – bojankoce Nov 18 '15 at 22:07
  • \$\begingroup\$ Just use the hex file and ignore the .bin if you are using IPE. \$\endgroup\$ – Spehro Pefhany Nov 19 '15 at 1:11
  • \$\begingroup\$ I did so but there was no success! :-( \$\endgroup\$ – bojankoce Nov 19 '15 at 8:49
  • \$\begingroup\$ Let me ask you one more question... \$\endgroup\$ – bojankoce Nov 19 '15 at 9:04
  • \$\begingroup\$ ... I have two .bin files (for eeprom and flash). You can find them here: sendspace.com/file/0nud7o How can I use them with PICkit 3 programmer and MPLAB IDE/IPE? Should I convert them to a .hex file before programming? \$\endgroup\$ – bojankoce Nov 19 '15 at 9:10

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.