3
\$\begingroup\$

There is a tool called avrsvf that can be used to convert .hex file to .svf for JTAG programming of AVR devices. The tool, however, does not support XMEGA devices. Is there a similar tool for XMEGAs?

\$\endgroup\$
1
\$\begingroup\$

http://www.avrfreaks.net/index.php?name=PNphpBB2&file=printview&t=92797&start=0[AVR forum][1]

on this page there is a link at the bottom by someone but it might not be for the one specific device he made it for.

So I didnt find any hex-svf converter for xmega A series. I wrote a little utility (win consol): http://www.vfx.hu/avr/xmegasvf-111029.zip Supported ATxmega128A1 only.

To do: - eeprom read/verify - lock bits read/verify - TCK period handler - all chip erase

vfx.

I am not vfx nor do i know if this actually works, but it seems like using a bootloader + FLIP should work if that program doesn't. Although I assumed you can't load a bootloader onto your xmega. http://www.batsocks.co.uk/readme/XMegaExamples.htm http://www.atmel.com/images/doc8429.pdf

Good luck.

\$\endgroup\$
  • \$\begingroup\$ Thank you for answering! What do you mean by "seems like a bootloader+FLIP"? \$\endgroup\$ – avakar Feb 26 '14 at 6:42
  • \$\begingroup\$ unfinished thought, editing. \$\endgroup\$ – Jeff Wurz Feb 26 '14 at 15:17

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.