I was shipped a USB dongle in a small pink baggie. If it's an anti-static bag I would love to re-use it. How sure can I be that it is, and is there a way to test it?

  • 2
    \$\begingroup\$ Usually the pink ones are only dissipative \$\endgroup\$ – PlasmaHH Feb 19 '16 at 14:07
  • 7
    \$\begingroup\$ See EEVblog #247 - Anti Static Bag Myth Revisted for a full discussion about about how bags work. In a nutshell, a pink bag won't generate static charges, but it will NOT protect against external charges. \$\endgroup\$ – Dave Tweed Feb 19 '16 at 15:20
  • 1
    \$\begingroup\$ Pink is dissipative & VERY quickly loses its ability to protect static-sentitive devices. DO NOT USE PINK BAGS \$\endgroup\$ – JonRB Feb 19 '16 at 18:04
  • \$\begingroup\$ I was under the impression that the pink bags are "anti-static" in the sense that they don't generate static electricity. If you want real anti-static (static-shielding) bags you really need the good silver-colored ones. EDIT: I just noticed that Dave Tweed already said this.... \$\endgroup\$ – DerStrom8 Feb 19 '16 at 18:13

If you ask the Jet Propulsion Lab (JPL) then 'No'. Pink PP bags have a very thin layer of "ESD" coating that is easy to rub off, and then your left with plastic which isn't good. At a place I worked we could only use them for shipping and then never again.

I'll quote the document (if that link goes down you could probably find it here):

From Standard: Electrostatic Discharge Control (JPL-D1348_Rev_F)

If you try and test it with a multimeter you may be rubbing the layer off.

2.3.30 Pink-Polyethylene (pink-poly)

The use of pink-poly bags, film, bubble-wrap or foam near any ESDS item or within an ESD protected area is prohibited. Pink-poly provides little protection against ESD events and voltage fields and is a contamination source. The preferred alternative is the metalized static-shielding bag.

| improve this answer | |

Try hooking alligator clips & multimeter leads to the bag.

Good anti-static bags should have some measurable conductivity (i.e. resistance less than infinity/err on your meter).

| improve this answer | |
  • 3
    \$\begingroup\$ Have you actually tried this? What kind of values did you get? I'm not getting anything even on the 20 Mohm settings on my meters, while testing a range of anti-static bags from different suppliers. \$\endgroup\$ – pipe Feb 19 '16 at 15:10
  • \$\begingroup\$ I don't have any handy right now, but have gotten reading of several Kohm in the past, from closely spaced leads/clips. Also, @DaveTweed posted a youTub vid where the (annoying) narrator demonstrates exactly this with a 'mylar' metallized esd bag. \$\endgroup\$ – Robherc KV5ROB Feb 19 '16 at 15:44
  • \$\begingroup\$ The mylar bags and the black conductive ESD foam will read some resistance on a multimeter. The pink bags have a static dissipative coating, but in my experience it's not conductive to the point where you could measure a resistance on an ohmmeter. \$\endgroup\$ – John D Feb 19 '16 at 15:52
  • 1
    \$\begingroup\$ For what it's worth, I checked some pink foam and the conductivity was less than 0.1nS, so more than 10G\$\Omega\$ \$\endgroup\$ – Spehro Pefhany Feb 19 '16 at 16:12

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.