For now, I'm sending bytes from FPGA (verilog) to serial at 115200 bps.
I would like to send at higher speed and connect to a bluetooth module (RN42).
- UART (SPP or HCI) and USB (HCI only) data connection interfaces.
- Sustained SPP data rates - 240Kbps (slave), 300Kbps (master)
- HCI data rates - 1.5Mbps sustained, 3.0Mbps burst in HCI mode
Then, now, I would like to implement a HCI UART in order to get max 3 Mbps.
I didn't find anything clear about how to implement this.
Could you help me? What's change? Should I just send my data to higher bps and it's done?
It's the first time I'm trying to implement another way to send data than serial.