my first question in this page :)
The sensors I use give analog signals, so I want to translate them all to I2C, but I can't find IC's that allow me to give them any desired address, I find only with very limited possibilities.
My idea is to have few cables in my system, so I would want to have these ADC ICs very near of each sensor and make the communication through I2C. Thank you for your help, and excuse me if the question has an easy answer, I'm still an student and just couldn't find anything that fitted my concept.
Maybe there is another way to do this... I saw multiplexors, which don't help me, because all the analog signals should go to it, so, at the end, I have the same quantity of cables going around. Then, I saw IC's with 3 address bits, but I need more address, like 15 or even more.
Thank you again for your help.