I have a DC SSR (Phoenix Contact 2964270) configured with an input of 0 - 5 VDC. It is trying to trigger a system with a sinking input SSR (Phoenix Contact 2966595). I have a 10K pull down resistor connected to the output of my SSR.
When I disconnect my cable and I connect the device's A2 input to it's 0V it successfully triggers.
When I measure the voltage with my SSR on I see 24VDC. When my SSR is off it only drops down to 14.3 VDC.
What do I need to do to get this A output closer to 0V to trigger?