What’s the good frequency of switching mode power supply to have good efficiency?
closed as too broad by PeterJ, Eugene Sh., Bence Kaulics, placeholder, W5VO♦ May 26 '16 at 15:01
Please edit the question to limit it to a specific problem with enough detail to identify an adequate answer. Avoid asking multiple distinct questions at once. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.
It depends on the power level and how good is good. The power grid runs on 50/60 Hz although not switched for a reason.
GW HVDC substations switches at about 50-2000 Hz. MW traction converters for trains around 1 kHz. Multi kW-power supplies for inductrial applications around 5-10 kHz. kW level high end amplifiers and welding equipment at about 50-100 kHz. 100 W laptop chargers and the like at about 60-200 kHz. Small 10 W cell phone chargers at ~500 kHz. Integrated single-W converters inside computers and simular in the MHz region.