I'm trying to get the OV7725 camera sensor to send out 10-bit data instead of 8 bit data but I can't seem to get it work. I have looked in the datasheet and all I can find about it seems to be in register COM10 (0x15) bit 0 and that one doesn't really affect anything except that the colors get a little fuzzy, and I assume that is because I don't receive the 2 lower bits, when it is set there is no activity on the D1:D0 data pins at all.
Is there something that I'm missing or?
And yes I have the camera working, I just can't seem to find all the registers that would have an impact on the output format mode. I have it set to RGB565 8 bit mode atm.