I have built this schemeHalf bridge

But this works only with 12V because of Vgs=20V. My question is: what do i need to change in this scheme to make suitable for 24V?

  • \$\begingroup\$ There is a massively increased potential for shoot-through when changing this circuit to run from 24 volts. Solve this problem first. If you don't understand shoot-through go google it. \$\endgroup\$ – Andy aka May 30 '17 at 9:49
  • \$\begingroup\$ Did not understand anything.maximintegrated.com/en/glossary/definitions.mvp/term/… Can you please make it clear for me? \$\endgroup\$ – Тимур Темириков May 30 '17 at 10:39
  • \$\begingroup\$ That maxim link seems pretty clear to me. \$\endgroup\$ – Andy aka May 30 '17 at 10:56