1
\$\begingroup\$

This is a question from a TV game show. Fill the blank with appropriate words.

Current flowing through a wire is ... to the voltage drop across the wire.

The answer in the dots is "proportional".

I am wondering if this is really an accurate statement. Should it be "current flowing through a resistor..." instead?

\$\endgroup\$
2
  • 7
    \$\begingroup\$ A wire IS a resistor. \$\endgroup\$
    – Dave Tweed
    Commented Jun 11, 2017 at 11:51
  • \$\begingroup\$ Wires have resistance but a very low resistance. \$\endgroup\$ Commented Jun 11, 2017 at 11:59

3 Answers 3

2
\$\begingroup\$

Wire has inductance (no matter how small) because it produces a magnetic field and if the voltage is AC then the current will not be time-stamped proportional to voltage but somewhat lagging in time (depending on the frequency applied).

I am wondering if this is really an accurate statement. Should it be "current flowing through a resistor..." instead?

I'd prefer your version because it kind-of naturally excludes inductance being an effect.

Also, because there is no mention of wire length, transmission line effects can screw this simple TV game show answer completely.

\$\endgroup\$
3
\$\begingroup\$

Every wire has a resistor which increase with the length. Since it's very small, we normally ignore it. Thanks to Ohm law, we can calculate the dropping voltage due to a resistor : \$U = RI\$, \$I = U * \frac{1}{R}\$. As you can see, the current is proportional to the volage drop by a factor of \$\frac{1}{R}\$

\$\endgroup\$
0
\$\begingroup\$

As a wire has some resistance (ignoring superconducting conditions), I say that this is a fine answer. One volt is the amount of force required to move one ampere of current through one ohm of resistance. This would make the current proportional to voltage for a fixed resistance.

\$\endgroup\$
2
  • \$\begingroup\$ Volts don't measure force but potential difference. I guess you're trying to simplify this for a beginner reader, but this kind of sloppiness is likely to just make them more confused. \$\endgroup\$
    – The Photon
    Commented Jun 11, 2017 at 15:17
  • \$\begingroup\$ it was the simplest path. feel free to make edits \$\endgroup\$
    – b degnan
    Commented Jun 11, 2017 at 16:29

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.