I bought a rfid rc522 and hooked it up with an arduino nano. The rc522 reader says it reads at a frequency of 13.56Mhz. The nfc ring is also at 13.56MHz but i can not get it working with it. The reader reads a card that came along with it so i know the reader is working. Any help?
closed as off-topic by Brian Carlton, Voltage Spike, Wesley Lee, clabacchio♦ Jul 20 '17 at 8:32
This question appears to be off-topic. The users who voted to close gave this specific reason:
- "Questions on the use of electronic devices are off-topic as this site is intended specifically for questions on electronics design." – Brian Carlton, Voltage Spike, Wesley Lee, clabacchio
NFC is a type of RFID, but not all RFID are the same, do not use the same encryption or communication style. That reader reads MIFARE cards. These are not standard NFC. It depends on the type of NFC card you got.