I'm putting together a PCB and I want to use single 8Gb (512*16) DDR3 chip (MT41K512M16HA) but the DDR3 address bank is less than the DDR3 chip.
Is it possible to use single 8Gb chip for this IC?
\$\begingroup\$
\$\endgroup\$
3
-
\$\begingroup\$ XC7A50T is an Artix-7 FPGA, not a Zynq part. Zynq parts all have a "Z" as the fourth character, e.g. "XC7Z035". \$\endgroup\$– user39382Commented Sep 7, 2017 at 18:16
-
\$\begingroup\$ sorry the part is XC7Z020-2CLG400I \$\endgroup\$– Danesh_saCommented Sep 7, 2017 at 21:21
-
\$\begingroup\$ see the parallela board they use a single ddr3 ic MT41K256M32SLD-125:E \$\endgroup\$– kakehCommented Sep 24, 2018 at 9:26
Add a comment
|