0
\$\begingroup\$

Could you be so kind to provide me with type of connector from this picture ? It's for PMS5003 particle sensor.

  • Connector has 8 pins
  • Distance between pins is roughly 1mm (sorry, don't have caliper)
  • Width is 11 mm
  • Thickness is 2 mm

Better pictures:

enter image description here

enter image description here

\$\endgroup\$
  • 1
    \$\begingroup\$ There are thousands of similar connectors of that sort. You have to measure the pitch of the pins and the width and thickness of the connector housing. \$\endgroup\$ – Janka Oct 2 '17 at 17:30
  • 1
    \$\begingroup\$ Please measure the pitch (center-to-center distance between contacts) and post it. Please take photos with better focus, and perhaps different angles. \$\endgroup\$ – Nick Alexeev Oct 2 '17 at 17:42
  • 1
    \$\begingroup\$ And throw in a ruler beside the connector for scale \$\endgroup\$ – Trevor_G Oct 2 '17 at 17:45
  • \$\begingroup\$ Looks closer to 1.25mm or .050" to me \$\endgroup\$ – Trevor_G Oct 2 '17 at 20:21
0
\$\begingroup\$

It looks like the housing has two keys on both ends, not on top as for some other housings. So it looks like the Molex 0510210800 PicoBlade series, with crimp connectors.

| improve this answer | |
\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.