I started a project in EAGLE, however found that the free version limits were too restricting. I then moved to KiCAD. I am trying to create a 144 pin chip as a library component for use in Eeschema.
In EAGLE I created commands from a spreadsheet using the datasheet so I could just copy and paste them into the command line. The commands designate the type of pin (power, I/O etc) pin name, pin number, position, orientation etc.
Is there any way of automating the creation of a library in KiCAD? I have spent a day or so going through the Eeschema manual but if the explanation is in there then I definitely missed it.