How I can set virtual JFET saturation current in Multisim. I can't find any parameter with appropriate name in model settings of virtual JFET?

  • \$\begingroup\$ Saturation current? \$\endgroup\$
    – G36
    Nov 4, 2017 at 9:24
  • \$\begingroup\$ @G36 Yes, Drain Saturation Current I_DSS \$\endgroup\$
    – MaxMil
    Nov 4, 2017 at 13:48
  • \$\begingroup\$ Idss is set by a JFET model used in the simulation. Red from the simulation the Beta value and Vto. And Idss = Beta*Vto^2 electronics.stackexchange.com/questions/316828/… \$\endgroup\$
    – G36
    Nov 4, 2017 at 15:21


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Browse other questions tagged or ask your own question.