0
\$\begingroup\$

This load-cell has sensitivity Cn = 2mV/V. In the data sheet the only part about the temperature coefficient is:

enter image description here

How can I calculate the change in sensitivity for a 10°C temperature difference?

\$\endgroup\$
2
  • \$\begingroup\$ If I'm understanding this correctly, dCn = Cn * 0.05% * dT / 10, where dCn is change in sensitivity, and dT is change in temperature in degrees Kelvin. Not entirely sure whether the temperature coefficient is positive or negative (the +/-0.0500 is confusing me there). \$\endgroup\$ Nov 11, 2017 at 12:31
  • \$\begingroup\$ Thanks a lot for the comment. Now I have a similar problem with interpreting the amplifier: electronics.stackexchange.com/questions/339537/… I would be glad to see your opinion. \$\endgroup\$
    – floppy380
    Nov 12, 2017 at 18:13

0

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Browse other questions tagged or ask your own question.