1
\$\begingroup\$

I'm looking at the output connector of a Lambda TCR600S1 power supply. It looks like this:

enter image description here

This has 8 pins and a metal shell with 5 notches on the inside, and what looks like some locking pins on the outside. It is supposed to be rated to high voltages (>600V). What is it?

(Unfortunately I have no documentation for this power suppply. I've used Lambda power supplies before, they usually come with screw terminals)

\$\endgroup\$
  • 2
    \$\begingroup\$ i deleted my other comments ... this is the closest (male version) ... bmisurplus.com/products/51365-bendix-pt02h-12-8p-connector so yours is a Bendix PT02H-12-8S \$\endgroup\$ – jsotola Nov 10 '17 at 4:59
  • 1
    \$\begingroup\$ amphenol-aerospace.com/pdf/12-070.pdf page 16 \$\endgroup\$ – jsotola Nov 10 '17 at 5:03
  • \$\begingroup\$ from what i can tell the connector and the metal shell are two separate parts. the metal part is a "holder" and the connector is a cable end. \$\endgroup\$ – jsotola Nov 10 '17 at 5:08
  • \$\begingroup\$ @jsotola Thank you! Yes, that looks like it. Post as an answer so I can accept and upvote :) \$\endgroup\$ – Alex I Nov 13 '17 at 3:27
1
\$\begingroup\$

this is the closest (male version)

https://www.bmisurplus.com/products/51365-bendix-pt02h-12-8p-connector

so yours is a Bendix PT02H-12-8S

from what i can tell the connector and the metal shell are two separate parts.

the metal part is a "holder" and the connector is a cable end.

\$\endgroup\$
1
\$\begingroup\$

It doesn't look unlike connectors made by the British Company Plessey. That were widely used on military aircraft back in the 1960's and later.

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.